VIGIBELT CDM80C

Belt alignment detector : ATEX (II 3 D) IP67 T 80°C

The built-in inductive detector features a pre-set control range of 15 / 20 / 25 / 30 / 36 mm inside the elevator leg. The control distance can be pre-set at the factory upon request for precise accuracy.

For installation, the detectors are mounted externally on the elevator legs in pairs, one on each side. The set includes gaskets and bolts for secure attachment. A 110 mm square hole is required on the lifting leg for proper installation.

Detection distance of: 15 / 20 / 25 / 30 / 36 mm
On request, detection distance can be preset at factory

The VIGIBELT CDS 80 C devices can be connected directly to a central control area or to the hazard monitor M-JET+

INSTALLED OUTSIDE THE ELEVATOR LEG PER PAIR (Supplied with gasket and bolts)
SQUARE OPENING OF 110 mm ON THE RISING LEG

Eligible for the standard 2014/34/UE
EN/IEC 60079-0 / EN/IEC 60079-31
IP6X-IEC 60529